Go straight to the aisles
Tennessee Index

Aisle Bathroom Vanities

Bathroom Vanities in Tennessee: Providers, Regulations & Buying Guide

Posted Reads in 4 min 3 stores 3 questions answered

If a vanity cabinet is built with hardwood plywood, MDF or particleboard, one federal rule gives a Tennessee buyer something concrete to check: a vanity made after March 22, 2019 that contains those panels should be labeled as TSCA Title VI compliant for formaldehyde. The three showrooms below sell vanities: PDI Kitchen, Bath & Lighting on Sidco Drive in Nashville, and two Knoxville showrooms, Standard Kitchen & Bath on Kingston Pike and Modern Supply on Lovell Road. Each was checked against its own website in October 2026, and the order is not a ranking.

Showrooms in Nashville and Knoxville that sell vanities

PDI Kitchen, Bath & Lighting, Nashville

Address: 4277 Sidco Dr, Nashville, TN 37204
Phone: 1-800-262-9231 (company line)
Website: https://www.relyonpdi.com/pages/showrooms

PDI runs showrooms and branches across the Southeast, and its Nashville location is on Sidco Dr. Its bath section lists freestanding tubs, rain showers and vanities, and the company invites shoppers to visit for decorative fixtures or plumbing supplies. If you are pairing a vanity with a new faucet and top, ask the showroom to confirm the faucet’s hole spacing matches the countertop before both are ordered.

Standard Kitchen & Bath

Address: 8719 Kingston Pike, Knoxville, TN 37923
Phone: 865.694.0068
Website: https://www.standardkitchen.com/

Standard Kitchen & Bath says it is a family-owned business serving Knoxville and East Tennessee since 1956, and it lists bathroom remodeling, a vanities and islands section, granite countertops and a showroom. It names Mouser Custom Cabinetry among its cabinet lines. If you want a vanity matched to other cabinets in the house, ask whether the same cabinet line offers both.

Modern Supply Kitchen, Bath and Lighting

Address: 525 Lovell Road, Knoxville, Tennessee 37932
Phone: 865.966.4567
Website: https://modernsupplyshowroom.com/

Modern Supply’s Knoxville showroom displays kitchen cabinets, bathroom vanities, countertops, sinks and lavatories, faucets and tubs, and the company says its consultants will measure, share ideas and guide customers through design and installation. If you are replacing a vanity in an existing bathroom, ask a consultant to measure the space and the existing plumbing locations before you choose a size.

The formaldehyde label on a vanity cabinet

The EPA’s consumer questions on the formaldehyde standards for composite wood name three regulated products, hardwood plywood, medium-density fiberboard and particleboard, and list kitchen cabinets and furniture among the goods made with them. Regulated composite wood products, and finished goods containing them, manufactured in or imported into the United States after March 22, 2019 must be certified and labeled as TSCA Title VI compliant. On a finished good such as a vanity cabinet, the label must include the fabricator’s name, the month and year it was produced, and a TSCA Title VI compliance statement.

For a buyer, that label sits on the cabinet or its box. A floor model or a discounted vanity from older stock may carry the earlier CARB Phase II label instead, which the EPA treated as satisfying the requirement until March 22, 2019.

Tennessee’s sales tax applies at the general state rate of 7% plus a local rate that may not be higher than 2.75%, according to the Department of Revenue, and its rate page lists a separate state single-article rate of 2.75% “on any single item sold in excess of $1,600, but not more than $3,200,” which a large vanity with a stone top can reach.

How to choose

  • Measure the wall width, the depth the room can spare, and the location of the supply lines and drain before you shop.
  • Decide on the top: an integrated top, a stone top cut to the vanity, or a separate vessel sink, and choose the faucet to match it.
  • Check the cabinet box material and look for the TSCA Title VI label on the cabinet or its box.
  • Ask who installs the vanity and connects the plumbing, and ask an installer for a Tennessee contractor or home improvement license number before you hire.

Frequently Asked Questions

What label should a new bathroom vanity have?

A vanity containing hardwood plywood, MDF or particleboard and made after March 22, 2019 should be labeled TSCA Title VI compliant, with the fabricator’s name and the month and year of production, according to the EPA.

Do these showrooms help with measuring and design?

Modern Supply says its consultants measure and guide customers through design and installation, and Standard Kitchen & Bath offers kitchen and bath design; ask PDI’s Nashville showroom what design help it provides for a single vanity.

Is there extra tax on an expensive vanity?

Possibly. Alongside the general state and local rates, the Department of Revenue lists a state single-article rate of 2.75% on any single item sold in excess of $1,600, but not more than $3,200; ask the showroom to show the tax lines on your quote.

A Nashville buyer matching a vanity with fixtures and lighting can start at PDI, a Knoxville homeowner remodeling a whole bathroom can start with Standard Kitchen & Bath’s design team, and one replacing a single vanity in place can start with Modern Supply’s measuring consultants.

Notes from shoppers

Leave a Reply

Your email address will not be published. Required fields are marked *