Aisle Smoke & Carbon Monoxide Detectors
Smoke & Carbon Monoxide Detectors in Tennessee: Providers, Regulations & Buying Guide
Posted Reads in 3 min 3 stores 3 questions answered
A smoke alarm is cheap to buy and easy to forget, and the U.S. Fire Administration’s guidance gives three dates to keep: test every month, change 9-volt batteries every year and replace the alarm every 10 years. If your home has fuel-burning appliances, a fireplace or an attached garage, ask about carbon monoxide alarms as well. The three Tennessee companies below install smoke and carbon monoxide detection or fire alarm systems: Pioneer Comfort, Customized Security Solutions and Symspire. Each was checked against its own website in October 2026, and the order is not a ranking.
Installers of smoke, CO and fire alarm systems
Pioneer Comfort
Address: 2525 Perimeter Pl Dr, #122, Nashville, TN 37214 (the site also lists 1317 16th Ave S, #5, Nashville; 830 Discovery Ln, Knoxville; and 1805 Burgess Falls Rd, Cookeville)
Phone: (615) 933-2288
Website: https://pioneercomfort.com/
Pioneer Comfort lists smoke and CO detectors among its home services, with locations in Nashville, Knoxville and Cookeville. If a technician is already in your home for HVAC or electrical work, ask about adding or replacing detectors on the same visit.
Customized Security Solutions
Address: 2159 N Thompson Ln, Ste B8, Murfreesboro, TN 37129
Phone: (615) 756-9991
Website: https://www.customizedsecuritysolutions.com/
Customized Security Solutions in Murfreesboro installs fire alarm systems along with security systems. Ask whether the smoke detectors can be monitored, so an alarm reaches a central station when you are away.
Symspire
Address: 9015 Overlook Blvd, Brentwood, TN 37027 (Brentwood and Nashville office; a Knoxville office is at 10932 Murdock Drive, Suite 103A)
Phone: (615) 332-0093
Website: https://www.symspire.com/
Symspire is a full-service integrator of residential and commercial security, fire, access control and surveillance systems, with 24/7 monitoring, and lists TN License # C-0842 on its site. For a monitored system, ask which smoke and CO sensors it supports.
Where to put alarms and when to replace them
The U.S. Fire Administration’s smoke alarms page says to install smoke alarms in every bedroom, outside each separate sleeping area and on every level of a home, including the basement, and advises choosing “interconnected smoke alarms so that when one sounds, they all sound.” It says to “test smoke alarms every month and replace 9-volt smoke alarm batteries at least once every year,” and to “replace the entire smoke alarm every 10 years.”
For carbon monoxide alarms, follow the manufacturer’s instructions on placement and replacement, and check the date printed on the back of any alarm you already own.
Detectors are taxed at Tennessee’s general state sales tax rate of 7%, plus a local rate that may not be higher than 2.75%, according to the Tennessee Department of Revenue.
Choosing smoke and CO alarms
- Cover every bedroom, outside each sleeping area and every level, including the basement.
- Choose interconnected alarms so all sound together.
- Decide between sealed long-life batteries, replaceable 9-volt batteries and hardwired alarms with battery backup.
- Ask about CO alarms if you have fuel-burning appliances, a fireplace or an attached garage.
Frequently Asked Questions
How often should I replace a smoke alarm?
The U.S. Fire Administration says to replace the entire smoke alarm every 10 years and test it every month.
Where should smoke alarms go in a home?
In every bedroom, outside each separate sleeping area and on every level of the home, including the basement, according to the U.S. Fire Administration.
Can smoke alarms be monitored in Middle Tennessee?
Customized Security Solutions installs fire alarm systems, and Symspire offers 24/7 monitoring of security and fire systems; ask each about monitored smoke and CO sensors.
A homeowner who wants detectors added during a service visit can start with Pioneer Comfort, a Murfreesboro homeowner or business can start with Customized Security Solutions, and a homeowner who wants monitored detection can start with Symspire.
Leave a Reply