Aisle Industrial Shelving
Industrial Shelving in Tennessee: Providers, Regulations & Buying Guide
Posted Reads in 3 min 2 stores 3 questions answered
Industrial shelving is bought by load: how much weight each shelf carries, how the load is placed, and whether people or forklifts reach it. A supplier that also installs and inspects can size the system to the load before it is built. The two Tennessee storage companies below sell and install industrial shelving and racking: Industry Mart in Cookeville and Warehouse Optimizers in Knoxville. Both were checked against their own websites in October 2026, and the order is not a ranking.
Shelving and rack suppliers in Middle and East Tennessee
Industry Mart
Address: 207 Swift Street, Cookeville, TN
Phone: 931-537-3161
Website: https://www.industrymartusa.com/
Industry Mart sells new and used pallet rack, cantilever and specialty rack, and industrial shelving including rivet rack boltless shelving and wide span. It says it has licensed and insured install crews and offers rack installation, inspections and liquidation, and it buys used rack. If you are expanding on a budget, ask whether used shelving in the size you need is in stock.
Warehouse Optimizers
Address: 505 Ambrose Street NW, Knoxville, TN 37921
Phone: (865) 540-4004
Website: https://warehouseoptimizers.com/
Warehouse Optimizers designs and installs pallet rack and storage systems, industrial and storage shelving, mobile aisle shelving and mezzanines, and offers pallet rack inspection and repair along with rack guards, netting and pallet stops. For a facility with forklift traffic, ask about guards on the shelving ends and uprights.
Workplace storage rules
For workplaces, the federal general industry standard on materials handling and storage, 29 CFR 1910.176, says: “Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.” Where mechanical handling equipment is used, the same section requires “sufficient safe clearances” for aisles, loading docks, doorways and turns, and says aisles and passageways must be kept clear and permanent aisles appropriately marked.
For a buyer, that means the shelving plan should include the load ratings, the aisle widths for your equipment and the marking of aisles, not only the shelf units. Ask the supplier for the load rating of each shelf and keep it posted.
Shelving is taxed at Tennessee’s general state sales tax rate of 7%, plus a local rate that may not be higher than 2.75%, according to the Tennessee Department of Revenue, and the Department lists a separate state single-article rate of 2.75% “on any single item sold in excess of $1,600, but not more than $3,200.”
Choosing industrial shelving
- List what goes on each shelf, with its weight, before asking for a quote.
- Choose boltless shelving for hand-loaded items and pallet rack for forklift loads.
- Plan aisle widths for the equipment that will work in them.
- Ask about anchoring, end guards and a schedule for inspections.
Frequently Asked Questions
Where can I buy used industrial shelving in Tennessee?
Industry Mart in Cookeville sells new and used rack and shelving and buys used rack.
Who installs warehouse shelving in Knoxville?
Warehouse Optimizers on Ambrose Street in Knoxville designs and installs shelving and pallet rack and offers rack inspection and repair.
Is there a federal rule on how materials are stored on shelving?
Yes. 29 CFR 1910.176 says storage of material shall not create a hazard and that tiered items must be stable and secure against sliding or collapse.
A business in the Upper Cumberland or Middle Tennessee looking for new or used shelving can start with Industry Mart, and a Knoxville facility planning shelving with forklift traffic can start with Warehouse Optimizers.
Leave a Reply